History About ISO
Menyambut Anniversary 100 Tahun VESSEL pada 2016 mendatang, dapatkan berbagai produk baru kami yang akan di Launching pada 2016


The Shop

LoadingUpdating...

VESSEL B-series : AC Pulse Ionizing Bars

* Ionizing method: Pulse AC corona discharge.
* Electrode needles: Tungsten.
* Extensive line includes a total of 15 models ranging from 600 mm to 3,000 mm in length.
* The ion balance adjustment function enables use of the device in a variety of applications (frequency, pulse ratio, and voltage output settings can be configured).
* Includes a credit card-shaped remote control that fits into a pocket, allowing the ion bar to be controlled from a distance (functionality includes frequency and pulse rate settings).
* Includes an air purge function, allowing static electricity erasing performance to be increased by supplying air to the device (clean, dry air or N2, max. 0.3 MPa). Low air consumption allows energy-saving operation.
* Low-voltage 24 VDC wiring makes it both easy and safe to embed the device inside automatic equipment.
* Safety-conscious design features a built-in high-voltage power supply and high-voltage cabling.
* Monitor functionality notifies the user in the event of a high-voltage malfunction or low ion level, or when it’s time to clean the electrode needles. The alarm signal can also be output. Additionally, the device can be monitored from a computer by using the RMS monitor function (optional).
* Electrode needle units twist off for easy replacement.
 
Berat : 0
Detail Produk:

B-series AC Pulse Ionizing Bars



* Applied voltage : 4.0 to 6.25 kVAC (variable in 10 stages at each electrode)
* Power supply and current consumption : 24VDC ±5%, 600 mA (max)
* Air supply : 0.1 MPa to 0.3 MPa
* Air supply hose diameter : 8 mm × 6 mm (PT1/8 air supply inlet)
* Ozone production : 0.05 ppm or less (measured 50 mm from device at 0.3 MPa)

* Static erasing capacity



* Accessories:
Power supply cable, remote controller (RMS-01)
2 end brackets with set screws (B-EB)
middle bracket with set screws (B-MB, depends on bar length)







<< Previous Product -    - Next Product >>