History About ISO
Menyambut Anniversary 100 Tahun VESSEL pada 2016 mendatang, dapatkan berbagai produk baru kami yang akan di Launching pada 2016


The Shop

LoadingUpdating...

VESSEL C-series : AC Pulse Ionizing Clean Bar

* Ionizing method : Pulse AC Corona discharge
* Super-compact design having high-voltage power supply, control cirinside. Generating alternately positive ions and negative ions from each electrode.
* The newly developed needle electrode socket incorporates an air purging structure which has air emission ports around the needle electrode.
* The opposite electrodes are incorporated in the body. This design enables to prevent particles from adhering to the outside of the body due to the induced voltage and to improve the ion generation efficiency by minimize applied voltage losses.
* The timer notifies when to clean needle electrodes. If a problem occurs at the high voltage output, the high voltage error lamp lights and “AL-1” appears on the display.
* This C series is equipped with a mode to optimally adjust the ion balance automatically according to the polarity of the charged matter.
 
Berat : 0
Detail Produk:

C-series AC Pulse Ionizing Clean Bar




Detail Drawing
Download

* Input power supply : DC24V±5%(connector RJ 45 )
* Current consumption : max 14.4W
* Power connection : PT 1 / 8, Hose ø8 mm OD×ø6 mm I D
* Air supply : Clean dry air or nitrogen (N2) (0.3 MPa or less)
* Setting functions :

~ Applied voltage…Max. 12. 5 kVpp Each polarit y can be set in ten steps from 4. 0 0 to 6. 25 kV
~ Frequency…Sel ect f rom ten steps ?0.1, 0.3, 1, 3, 5, 8 , 10, 20, 30, 50 Hz
~ Pulse ratio…Positive ion 4 0 to 70 %, negative ion 6 0 to 3 0 %
~ Auto balance…Effective when Auto Balance mode is enabled (Distance 50 to 100 mm)
~ Needle cleaning timer…Effective when needle cleaning timer is enabled (One day un t from 1 to 60 days)

* Ion balance : ± 30 V (Distance 1000 mm)
* Warning output : High voltage error, Needle cleaning timer (Only when set) [Connector RJ45]
* Operating temperature and humidity : 0 to 50 °C, 35 to 85 %RH (With no dew condensation or freezing)
* Operating distance : Approx. 50 to 2000 mm
* Ozone production : 0.05ppm or less
* Material Body : Flame- retardant ABS resin, Needle electrode: Tungsten
* Accessories : I nstruction Manual, Remote controller×1, Power cable (5m)×1, End brackets×2, Middle bracket (See back side)
* Air flow : L / min


Static Erasing Performance
Download







<< Previous Product -    - Next Product >>