History About ISO
Menyambut Anniversary 100 Tahun VESSEL pada 2016 mendatang, dapatkan berbagai produk baru kami yang akan di Launching pada 2016


The Shop

LoadingUpdating...
Servo Nippers
Outstanding positioning control by sequencer control and light movement by electromotive servo cylinder has achieved high precision lens cuts.

Matching the Needs of the Age
These nipper units are designed to meet the ever-changing needs of the age, from high precision performance required for products such as PDP light panel gate cuts, plastic lenses, and LED diffusion panel cuts.

Simple Programming
Both blade travel distance and speed can be easily set using a touch-panel controller. "High speed forwarding" to a close proximity to the gate diameter and a "low speed" cutting process achieves high levels of both accuracy and efficiency.

Stable Cutting Surfaces
Positioning accuracy is less than ± 0.1mm. Blade feed is servo-controlled to ensure stable cut surface quality.

Low-Temperature Cutting is Now Possible
Fine pitch feeding is possible, enabling low-temperature cutting work to prevent whitening and cracking. Low-temperature cutting is an attractive solution for product melting and deformation trouble.

VESSEL Servo Heat Nippers (With Motor Cylinder)

* Starts with just the start signal from the unwinder.
* Performs all steps from gate-cutting start to end. Outputs end signal at the end of cutting. No need to reprogram operation command ladder program.
* Complicated cutting conditions can be easily programmed for each workpiece using the dedicated controller.

GT-NKHD45-50Download Drawing 2D
VESSEL Servo Heat Nippers (With Motor Cylinder)Detail Produk

Servo Heat Nippers (With Motor Cylinder)


Servo Heat Nippers (With Motor Cylinder) Size


Servo Heat Nippers (With Motor Cylinder) Description

Accessories:
* Power supply
* Heater Code
* Parallel Cable
* ADP Cable
* Power Cord
* Senser Cord

Option:
* Temp. Controler (DTC-001)
*Controller (CTC-33)





VESSEL Servo Heat Nippers (With Motor Cylinder) Small Type for Lens Cutting

* Starts with just the start signal from the unwinder.
* Performs all steps from gate-cutting start to end. Outputs end signal at the end of cutting. No need to reprogram operation command ladder program.
* Complicated cutting conditions can be easily programmed for each workpiece using the dedicated controller.

GT-NKHD20A-10Download Drawing 2D, GT-NKHD20AR-10Download Drawing 2D
VESSEL Servo Heat Nippers (With Motor Cylinder) Small Type for Lens CuttingDetail Produk

Servo Heat Nippers (With Motor Cylinder) Small Type for Lens Cutting


Servo Heat Nippers Size


Servo Heat Nippers Description

Accessories
* Power supply
* Heater Code
* Parallel Cable
* ADP Cable
* Power Cord
* Senser Cord

Option
* Temp. Controler (DTC-001)
* Controller (CTC-33)