History About ISO
Menyambut Anniversary 100 Tahun VESSEL pada 2016 mendatang, dapatkan berbagai produk baru kami yang akan di Launching pada 2016


The Shop

LoadingUpdating...
Fan Type

 

VESSEL SFQ9-E : Fan-type Ionizer with Integrated Sensor

* Ionizing method: Piezoelectric high-frequency DC corona discharge
* Electrode needles: Tungsten
* A proprietary feedback sensor corrects the ion balance to within ±5 V
* Dual piezoelectric transformers deliver exceptional static-erasing performance over the long term
* Airflow can be set to any of three quiet settings (with a noise level of just 49.6 dB at the highest setting).
* Both an alarm LED and external output terminal provide notification in the event of a fan lockup or high-voltage malfunction.
* In another industry first, a high-brightness LED lets you check for dirt on the discharge electrode visually.
* The electrode needle unit is removable for improved maintenance
VESSEL SFQ9-E : Fan-type Ionizer with Integrated SensorDetail Produk

SFQ9-E?Fan-type Ionizer with Integrated Sensor



* Applied voltage : DC±4 kV~DC±8 kV
* Power supply : DC24V±5%
* Current consumption : 340mA(max.)
* Airflow : 1.8m3/min (at max. airflow)
* Noise level : 49.6 dBA (measured 1 m from device at max. airflow)
* Ozone production : 0.05 ppm or less (measured 50 mm from device at max. airflow)
* Ion balance : Within ±5 V; Decay time : 1.6 sec or less
* Operating temperature and humidity : 5°C to 40°C, 35% to 65% RH (non-condensing, non-freezing)
* Static erasing area


* Accessories : Power supply transformer No. AD24-IT-EX






VESSEL F6ST-E : Ionizing Mini-Fan with Stand

* Ionizing method: Piezoelectric high-frequency AC corona discharge.
* Featuring a compact, lightweight design. Compact fan-shaped ionizer.
* Interior LED light lets you check for dirt on the electrode needles visually.
* By detaching the louver, the needles can be easily cleaned. Automatic shutoff for electrode over the needles.
* Comes with a stand which enables ready installation at a suitable direction angle.
* Warning indicator notifies you if the fan locks up or abnormally high voltage is detected. LED lamp notifies you in case of abnormalities. Also, its safety mechanism automatically stops the fan and ion generation when the louver is taken off.
VESSEL F6ST-E : Ionizing Mini-Fan with StandDetail Produk

F6ST-E Ionizing Mini-Fan with Stand


# The above measurement does not include the stand and other protruding parts.

* Power supply : DC24V±5%
* Current consumption : 253mA (typ.)
* Noise level : 58.5dB [Fan speed: HI]?40.4dB [Fan speed: LOW]
* Fan speed : 0.87m3/min [Fan speed: HI]?0.4m3/min [Fan speed: LOW]

* Accessories : Power supply transformer No. AD24-ITF6 AC cable (1.8m)

* Static erasing performance


Charged plate monitor : TREK 158, which conforms to ANSI EOS/ESD S3.1, was used for measurement.
Measurement conditions : Max. fan speed, Temperature : 25°C, Humidity: 50%

Top : Ion balance
Middle : Decay time required for static discharge from +1000V to +100V
Bottom : Decay time required for static discharge from –1000V to –100V

# Static electricity erasing capability values given in this catalog were obtained in our
measurement environment. Your results may differ depending on the operating environment.






VESSEL F6CL-E : Ionizing Mini-Fan with Clip

* Ionizing method: Piezoelectric high-frequency AC corona discharge.
* Featuring a compact, lightweight design. Compact fan-shaped ionizer.
* Interior LED light lets you check for dirt on the electrode needles visually.
* By detaching the louver, the needles can be easily cleaned. Automatic shutoff for electrode over the needles.
* Comes with a clip for easy installation. The unit can be flexibly installed on a cell-production stands or desks at most appropriate angles.
* Warning indicator notifies you if the fan locks up or abnormally high voltage is detected. LED lamp notifies you in case of abnormalities. Also, its safety mechanism automatically stops the fan and ion generation when the louver is taken off.
VESSEL F6CL-E : Ionizing Mini-Fan with ClipDetail Produk

F6CL-E Ionizing Mini-Fan with Clip


# The above measurement does not include the clip and other protruding parts.

* Power supply : DC24V±5%
* Current consumption : 253mA (typ.)
* Noise level : 58.5dB [Fan speed: HI]?40.4dB[Fan speed: LOW]
* Fan speed : 0.87m3/min [Fan speed: HI]?0.4m3/min [Fan speed: LOW]

* Accessories : Power supply transformer No. AD24-ITF6 AC cable (1.8m)

* Static erasing performance


Charged plate monitor : TREK 158, which conforms to ANSI EOS/ESD S3.1, was used for measurement.
Measurement conditions : Max. fan speed, Temperature : 25°C, Humidity : 50%

Top : Ion balance
Middle : Decay time required for static discharge from +1000V to +100V
Bottom : Decay time required for static discharge from –1000V to –100V

# Static electricity erasing capability values given in this catalog were obtained in our
measurement environment. Your results may differ depending on the operating environment.





VESSEL F120S-E : Fan-type Ionizer

* Silent fan model with mild airflow.
VESSEL F120S-E : Fan-type IonizerDetail Produk

F120S-E Fan-type Ionizer


# Width, height, depth, including the stand



* Ionizing method/Applied voltage : Piezoelectric high-frequency AC corona discharge/AC 10kV (p-p)
* Power supply and current consumption : DC24V±5% / 700mA (max)
* Ion balance : within ±10V
* Decay time : 2.5 sec or less
* Operating range : 150 mm to 900 mm
* Fan speed : 2.21m3/min (max)
* Noise level : HI 50.7dBA
* Ozone production : 0.05ppm or less (measured 50mm)
* Operating environment temperature and humidit : 5°C to 40°C / 35% to 65% RH (with no dew condensation or freezing)
* Accessories : AC adapter AD24-IT-EX AC cable (1.8m)






VESSEL F120R-E : Fan-type Ionizer

* Ionizing method:?Piezo high-frequency AC Corona discharge method
* Our original compact piezoelectric transformer realizes a slim & compact body.
* The powerful 120 mm square DC fan feeds ionized air to remote places. The fan’s airflow volume can be adjusted in three stages.
* The airflow direction and angle at the front cover can be changed to set the static erasing range to straight or wide angle.
* The front cover can be opened and closed with a single touch. Easy access to the internal components simplifies maintenance. The "needle electrode", which must be cleaned or replaced, is unit-type module which can be replaced easily without tools.
VESSEL F120R-E : Fan-type IonizerDetail Produk

F120R-E Fan-type Ionizer


#Width, height, depth, including the stand

* Applied voltage : AC10kV (p-p)
* Power supply andcurrent consumption : DC24V±5%?700mA (max)
* Airflow : 3.66m3/min (at max airflow)
* Noise level : 62.1dBA (at max airflow, airflow direction straight, measured at 1m) (measured values)
* Ozone production : 0.05ppm or less (measured 150mm)
* Error warning : High voltage output stop (red LED), fan locked (red LED)
* Protection function : Fan motor rotation monitor function (locking detection), high voltage output shut down function (overload detection), front cover safety device (circuit shutoff when open)
* Operating environment temperature and humidity : 5°C to 40°C / 35% to 65% RH (with no dew condensation or freezing)
* Operating range : 150 mm to 900 mm
* Installation place : Non-hazardous place indoors
* Decay time : within 1.3 sec (at max airflow, Air flows straight, measured at 300mm) (measured values)
* Ion balance : within ±10V (at max airflow, Air flows straight, measured at 300mm) (measured values)
* Material
Body : Flame-resistant ABS resin
Stand : Stainless steel
Front Cover : Flame-resistant ABS resin
Electrode needles : Stainless steel
* Accessories : AC adapter AD24-IT, Instruction Manual
* Static erasing area