From tightening tool driver, bit socket, such as air tools, ESD protection products in the factory to the wide range of products packed group information "/>
History About ISO
Menyambut Anniversary 100 Tahun VESSEL pada 2016 mendatang, dapatkan berbagai produk baru kami yang akan di Launching pada 2016


The Shop

LoadingUpdating...
Gas Engined Tools

VESSEL GT-3500GE : GASOLINE ENGINE IMPACT WRENCH

* Portable impact wrench, which does not require any external power supply. Handy for remote areas.
* More than 10000 units have been sold all over the world. The standard tool for railway maintenance throughout the world.
* Wrenching torque is guaranteed by our long history as one of the world’s leading makers of heavy and high-torque pneumatic impact wrenches.
* Its gasoline engine is specifically designed for powerful, high-impact wrenching
* CE compliant / Full Emission Control directive compliance
* Vibration reduced model is also available. (Please inquire us).
VESSEL GT-3500GE : GASOLINE ENGINE IMPACT WRENCHDetail Produk

GT-3500GE GASOLINE ENGINE IMPACT WRENCH



Engine
Type : Two Stroke, Forced, Air Cooled, Single Cylinder
Displacement : 46.5cc, Ø43×32mm (Inner bore size×stroke)
Fuel Tank Capacity : 1 liter
Fuel Mixture Ratio : 25:1 (gasoline:2 cycle oil)
Revolution (idling) : 2700 rpm ±250
Revolution (loaded, impact) : 7120 rpm
Revolution (non loaded, max) : 9880 rpm

Ignition
Type : Electronic
Spark Plug Type : NGK BPMR6A

Carburetor
Type : Diaphragm

Impact
Square Driver Size : 25.4mm (1")
Fastening Torque Range : 1700 N.m (Full Throttle : 1255 ft.lbf)/950 N.m (Half Throttle : 701 ft.lbf)
Free Speed : 1200 rpm

Capacity
Bolt Diameter : 32mm (1 1/4")

"Yellow Guppy" Carrying Case /No.3500 GP
W450mm×L920mm×H430mm
Weight : 6kg (Case only)




GASOLINE ENGINE IMPACT WRENCH in Use





VESSEL GT-5000HD : GASOLINE ENGINE HAMMER DRILL

* Max. 50mm (2”) diameter hole can be drilled. The biggest sized hole for a portable gasoline engine hammer drill.
* Compatible with SDS max retainer shanks, which are available all over the world.
* Made-in-Japan quality and durability.
* Working mode can be switched between “drilling” and “hammer-drilling.”.
* For rock/concrete drilling, chiseling, mining, stone cutting, tombstone processing, drilling holes for surveyor’s markers, etc.
* CE compliant. Full Emission Control directive compliance.
* GT-5000HD ships standard with a vibration reducing handle.
VESSEL GT-5000HD : GASOLINE ENGINE HAMMER DRILLDetail Produk

GT-5000HD GASOLINE ENGINE HAMMER DRILL



Engine
Type:Two Stroke, Forced, Air Cooled, Single Cylinder

Displacement : 46.5cc, Ø43×32mm (Inner bore size×stroke)

Fuel Tank Capacity : 1 liter
Fuel Mixture Ratio : 25:1 (gasoline:2 cycle oil)
Revolution (idling) : 2700 rpm ±250
Revolution (loaded) : 9880 rpm
Maximum Output : 2.3Ps/7500 rpm
Maximum Torque : 0.34kg-m/5500
Compression Rate : 7.1:1
Fuel Consumption Rate : 380g/Ps.h

Ignition
Type : Electronic
Spark Plug Type : NGK BPMR6A

Carburetor
Type : Diaphragm

Impact
Hammer Drill : 50mm (2"), Shank : "SDSmax"
Fastening Torque Range : 1700 N.m (Full Throttle : 1255 ft.lbf)/950 N.m (Half Throttle : 701 ft.lbf)
Free Speed : 1200 rpm

Capacity
Bolt Diameter : 32mm (1 1/4?)

Aplications




Accessories
* Hex Key Wrench : 4mm 1pc. /5mm 1pc. / 6mm 1pc.
* Spark Plug Wrench
* Spanner : 10 - 13mm 1pc.
* Side Handle : 1pc.
* Stopper : 1pc.
* Grease : 1pc.

# Remarks : Hammer Drill Bit is not included.